Denver IR120 Moisture Balance [reconditioned]

$5,800.00

Denver Instrument Company

IR-120 [reconditioned]

Moisture Analyzer

Description:

  • Moisture/Solids analyzer
  • Heated using infrared heat to liberate moisture
  • Combines the performance and sophistication of modern laboratory instruments
  • This product is intended for indoor use.
  • It is applicable to powders, liquids, pastes, slurries and some solids
  • Improve process control
  • Increase profits
  • Durable construction
  • Complies with AOAC Official Methods
  • Precise measurement of Moisture and Solids
  • Printer (external) Optional
  • Languages: English, German, Italian, French, Spanish

Specification:

  • Dryer functions:
  • Heating element: Quartz IR heater (coiled quartz radiator)
  • Temperature range:
    • 40 210C
    • 86 392F
  • Temperature increments: adjustable in 1C increments
  • Temperature adjustment: with temperature adjustment set
  • Weighing capacity: 120 g
  • Readability:
    • 1 mg
    • 0.01%/0.001 % moisture content
  • Repeatability, average (%):
    • sample weight = 1 g: 0.1%,
    • sample weight = 5 g: 0.02%
  • External calibration weight (of at least accuracy class...): 50 g (E2)
  • Sample pan dimensions: 90 mm
  • Drying programs: standard, quick, gentle, 3 temperature phases
  • Drying time: 6 sec. to 999 min
  • Number of programs: 100
  • Shutoff criteria: Fully automatic, semi-autom., time (3x 999 min.), manual
  • Display for analysis results: Moisture (calculated value), dry weight, RATIO, weight loss, residual weight (g or g/kg), Grams/liter (g/l)
  • Fuses: 2 (neutral conductor/phase), 6.3 AT, 5 x 20 mm
  • Operating temperature range: +10 ... +30C (50F 86F)
  • Power consumption: 700 VA max.
  • Built-in interface: RS-232C
  • Format: 7 or 8 bit ASCII, 1 start bit, 1 or 2 stop bits
  • Parity: Space, odd or even
  • Transmission rates: 150 to 19,200 baud
  • Handshake: Software or hardware
  • Digital input: 1, adjustable function
  • Digital outputs: 4, operating state of analysis

Electrical Requirements:

  • Dimensions (L x W x H): 350 x 453 x 156 mm
  • Net weight, approx.: 8 kg
  • Voltage: 230 V or 115 V selectable by replacing the heating unit, 15% ... + 10%
  • Frequency: 48 60 Hz

Denver IR120, Denver-IR120, Denver IR120, IR60, Denver IR

Instruments listed above are registered trademark of their respective corporation.


Add to Cart:

  • Model: IR120
  • Shipping Weight: 35lbs
  • Manufactured by: Denver Instruments


This product was added to our catalog on Wednesday 03 September, 2008.

Copyright © 2017 Laboratory Instrument Specialists. Powered by Zen Cart