Denver Instrument Company
IR-60
Moisture Analyzer
Description:
Moisture/Solids analyzer
Heated using infrared heat to liberate moisture
Combines the performance and sophistication of modern laboratory instruments
This product is intended for indoor use.
It is applicable to powders, liquids, pastes, slurries and some solids
Improve process control
Increase profits
Durable construction
Complies with AOAC Official Methods
Precise measurement of Moisture and Solids
Printer: External
Languages: English, German, French, Italian, Spanis
Specification:
Dryer functions:
Heating element: Quartz-rod IR heater
Temperature range: 40 – 210°C
Temperature increments: adjustable in 1°C increments
Temperature adjustment: with temperature adjustment set
Weighing Functions:
Weighing capacity: 60 g
Readability: 1 mg, 0.01% moisture content
- Repeatability, average (%):
- sample weight 1–5 g: 0.2%
- sample weight 5 g: 0.05%
External calibration weight (with an accuracy of at least...): 50 g (E2)
Sample pan dimensions: 90 mm
Drying parameters:
Drying programs: Standard
Drying time: 0.1 to 99.9 minutes
Number of programs: 5
Shutoff criteria: Fully automatic, semi-autom. (1 – 20 mg/24 s), timer mode (1 + 99.9 Min.)
Display of analysis results: Moisture, dry weight, RATIO, residual weight (g or g/kg)
Minimum sample weight: 0.100 g
Analyzer (hardware):
Fuses: 2 (neutral conductor/phase), 6.3 AT, 5 + 20 mm (internal)
Operating temperature range: +10 ... +30°C
Power consumption: 700 VA max.
Built-in interface: RS-232C
Format: 7 bit ASCII, 1 start bit, 1 or 2 stop bits
Parity: Odd or even
Transmission rates: 150 to 19,200 baud
Handshake: Software or hardware
Electrical Requirements:
Dimensions (W x D x H): 213 x 320 x 181 mm
Net weight, approx.: 5.1 kg
Voltage: 230 V or 115 V (depending on model), –15% ... +10%
Frequency: 48 – 60 Hz
Denver IR60, Denver-IR60, Denver IR60, IR60, Denver IR
Instruments listed above are registered trademark of their respective corporation.
This product was added to our catalog on Wednesday 03 September, 2008.
