Sartorius MMA30 Microwave Moisture/Solid Analyzer– Reconditioned


The Sartorius MMA30 analyzer is the latest model in the series and offers fast and precise moisture measuring. The MMA30™ microwave moisture/solids analyzer is similar to its sisters analyzers (Omnimark uWave and Denver M2). The magnetic field sensor allows high moisture content to be measured four to six times faster than other microwave systems. It requires a smaller sample size and a shorter analysis time. The easy to follow menu driven operation allows user friendly operation. Up to 90 user-designed programs can be stored allowing different samples to be tested without reprogramming. A built-in printer and built-in RS232 interface is included.


  • Indoor Use Only
  • The Sartorius MMA30 is a rapid moisture determination system it specializes in high moisture
  • Quick Moisture/Solid Analyzer
  • Many samples yield results in less than 1 minute!
  • Improved process control
  • Saves time and money
  • Incorporates new, patented microwave technology
  • Microwave chamber is small and cylindrical
  • Energy is focused on the sample
  • Sensor technology determines when water is fully liberated
  • Low power consumption; no charring of the sample
  • Easy to use
  • Simple key stroke to test a sample
  • Automatic weight capture of initial and final weight
  • One-step recall of up to 30 customizable programs


  • Measurement method: Microwave radiation and detection of weight loss
  • Power setting: 30-100% of 450 watts
  • Balance capacity: 30 grams
  • Balance readability: 0.1 mg
  • Readability of result: 0.01%
  • Working range: 10-100% Moisture
  • Units of results: Percent moisture, solids, volatiles, mg/L, weight loss and custom
  • End of analysis modes: Time-out or custom slope with sensor
  • Display: 5.9” VGA resolution backlit liquid crystal display (LCD) (320 X 240 dots)
  • Controls: Test, Enter, 4 arrows, 4 softkeys and numeric keypad with decimal and +/- keys
  • Program storage: 30 drying procedures with alphanumeric naming
  • Data storage: 495 last results with statistical evaluation
  • Integral printer: Thermal, graphical 500 dots per line
  • External I/O: One serial bi-directional and one serial uni-directional RS232
  • Class I Equipment (grounded)
  • Mains supply voltage should not exceed +10% of the nominal supply voltage
  • Sound Pressure: <70 dBA
  • Operating Temp Range: 15°C - 40°C
  • Recommended Altitude: <3000 M
  • Operating Humidity: 80% for temperatures to 31°C, decreasing linearly to 50% relative humidity at 40°C
  • Pollution Degree: 2
  • Installation Category: II for transient voltages

Electrical Requirement:

  • Input power requirements:
    • 100V, 50/60 Hz, 550W, 10 Amps
    • 120V, 60 Hz, 550W, 10 Amps
    • 230V, 50 Hz, 550W, 5 Amps

Sartorius MMA30, Sartorius MMA-30, Sartorius MMA 30, MMA30

Instruments listed above are registered trademark of their respective corporation.

Add to Cart:

  • Model: MMA30
  • Shipping Weight: 100lbs
  • Manufactured by: Sartorius Mechatronics

This product was added to our catalog on Wednesday 03 September, 2008.

Copyright © 2017 Laboratory Instrument Specialists. Powered by Zen Cart